Free Animation Tutorials

Archive for the ‘beginners’ Category

How to do fire.in this video you see how to create a fire in flash very easy and simple way.watch n play with fire.

 

Let see how to see animation seperation in flash.

Curving Lines and Edges:

Moving

You can move a line with the mouse, quite similar to how you’d turn it into a curve or you can move it with the arrow keys.

1. Select the Arrow tool.
2. Make sure the line is selected (you can do this by clicking once on the line then release the mouse button).
3. Click on the line, and while holding down the mouse button, move it to the new position.
4. Press the arrow keys on your keyboard to move the line.

Precise Size and Positioning

You can position the line perfectly by using the info panel.

The “square” connected to the line where it says “Click this square” is used to set the origin for coordinates – either at top left or center of the stage.
Fields for X and Y are used to enter the position of the selected object.
Fields for W and H are used to enter the width and height of the selected object.
When working with lines, one might think that height would be 1 for a thin line.
However, width and height refers to the square between the start and end points of the selected object.

A horizontal line that is 100 pixels wide and 1 pixel high spans a square of 100 x 1 pixels. A similar line would span a square of 100 x 100 pixels if it was turned 45 degrees.

Oval Tool

The Oval tool is used to make circular objects. Simply select the tool and drag on the Stage to draw a circle that spans between the start and end points.

SHIFT key : Round Circles

You can press the Shift key while dragging to ensure your circle is perfectly round.

Colors

You can specify the colors with the Stroke and Fill Color Tools.

Ctrl+G : Grouping Outline with Fill

When you draw a circle, Flash actually creates two objects: the fill and the outline. This may cause problems if you try to move your circle to a new position, because if you fail to select both objects, only the one selected will be moved. To avoid this it’s often a good idea to “group” the outline with the fill, thus locking them together as if it was a single object

1. Make sure both the fill and the outline is selected. (You can do this in two ways:a. Select the Arrow tool in the toolbox, and while holding down the SHIFT key click on both the fill and the outline.b. Select the Arrow tool in the toolbox, and drag a rectangle outside your circle)
2. Press Ctrl+G to group the selected objects. (If at a later point you want to “break” apart the grouped objects, you can do it by selecting the grouped object then pressing Ctrl+B).

Precise Size and Positioning

You can position the oval perfectly using the info panel.

Info Panel : Window > Panels > Info

The “square” connected to the line where it says “Click this square” is used to set the origin for coordinates – either at top left or center of the stage.

Fields for X and Y are used to enter the position of the selected object. Fields for W and H are used to enter the width and height of the selected object.

Rectangle Tool

The Rectangle tool is used to make rectangular objects. Simply select the tool and drag on the Stage to draw a rectangle that spans between the start and end points.

SHIFT key : Proportioned Squares

You can press the Shift key while dragging to constrain proportions for the rectangle, to ensure your rectangle is a perfect square.

Colors

You can specify the colors with the Stroke and Fill Color Tools.

Rounded Corners

You can specify the rounding of the corners with the “Round Rectangle Options” at the bottom of the toolbox.

Ctrl+G : Grouping Outline with Fill

When you draw a rectangle, Flash actually creates two objects: the fill and the outline. This may cause problems if you want to move your rectangle to a new position, because if you fail to select both objects, only the one selected will be moved.

To avoid this it’s often a good idea to “group” the outline with the fill, thus locking them together as if they were a single object.

1. Make sure both the fill and the outline are selected. (You can do this in two ways:a. Select the Arrow tool in the toolbox, and while holding down the SHIFT key click on both the fill and the outline.b. Select the Arrow tool in the toolbox, and drag a rectangle outside your rectangle)
2. Press Ctrl+G to group the selected objects. (If at a later point you want to “break” apart the grouped objects, you can do it by selecting the grouped object then pressing Ctrl+B).

Skewing

Before skewing a rectangle make sure it has been grouped. You can skew the rectangle in two ways.

To skew an object by dragging:

1. Select the object with the Arrow tool.
2. Click the Rotate button in the toolbox options.
3. Drag one of the centered handles.

To skew an object using the Transform panel:

1. Select the object.
2. Choose Window > Panels> Transform.
3. Click Skew.
4. Enter angles for the horizontal and vertical values

Precise size and positioning

You can position the Rectangle perfectly using the info panel. Info Panel :

Window > Panels > Info

The “square” connected to the line where it says “Click this square” is used to set the origin for coordinates either at top left or center of the stage.

Fields for X and Y are used to enter the position of the selected object.
Fields for W and H are used to enter the width and height of the selected object.

Eraser Tool:

The Erase tool works similar to a classic eraser. Simply select the tool and drag on the Stage to erase things.

Double-click Eraser Tool:

Erase All You can double click the Eraser tool to delete everything on the stage. (If you happen to do this by mistake you can always click Ctrl+Z to undo).

Using the Eraser Mode Option

In the options listed at the bottom of the toolbox you can specify the Eraser Mode:

• Erase Normal – erases strokes and fills on the same layer.
• Erase Fills – erases only fills; strokes are not affected.
• Erase Lines – erases only strokes; fills are not affected.
• Erase Selected Fills – erases only the currently selected fills and does not affect strokes, selected or not. (Select the fills you want to erase before using the Eraser tool in this mode.)
• Erase Inside – erases only the fill on which you begin the eraser stroke. If you begin erasing from an empty point, nothing will be erased. Strokes are unaffected by the eraser in this mode.

More Flash Tuotrials:  For beginners

Flash is both a drawing tool and a movie editor. If you’ve used other graphics applications, some of the tools may look familiar, but some won’t. To keep things simple, let’s start with a little introduction to the interface before diving right in to the nuts and bolts.

The drawing tools in Flash let you create and modify shapes for the artwork in your movies. For an interactive introduction to drawing in Flash, choose Help > Lessons > Drawing in your Flash program. The tools for painting are kept in the “Tools” bar, usually positioned at the left top of your Flash Screen.

This is the main area where you will find all your image editing tools.

On the following pages we will guide you through the use of each of these tools, starting with the simplest.

But before going through the different tools, we will look at the way Flash handle drawings. The most important thing to understand is the distinction between outlines and fills. When you draw a line there is no fill – only the outline. When you draw a rectangle (or a circle) you actually draw two things: The outline (border) and the fill. Unlike most other programs, Flash doesn’t automatically combine these two into one object.

Pencil Tool:

The Pencil tool is used in much the same way that you would use a real pencil to draw. Simply select the tool and drag on the Stage to draw with the Pencil tool.

SHIFT key : Constrain directions You can press the Shift key while dragging to constrain lines to vertical or horizontal directions.

Colors

You can specify the color with the Stroke Color Tool.

Smoothing and Straightening

Stroke panel : Window > Panels > Stroke
Finally, you can specify line style (solid, dotted etc.), line width in pixels and color using the Stroke panel.

Line Tool:

The Line tool is used in much the same way that you would use a real pencil to draw with a ruler. Simply select the tool and drag on the Stage to draw a straight line between the start and end points.

SHIFT key : Constrain angles

You can press the Shift key while dragging to constrain possible angles for the line. By default this will only allow for lines that are either horizontal, vertical or 45 degrees between.

Colors

You can specify the color with the Stroke Color Tool.

Curving You can turn a straight line into a curve with the Arrow tool

1.  Make sure the line is not selected (you can do this by clicking somewhere on an empty spot on the stage).
2. Select the Arrow tool.
3. Click on the line, and while holding down the mouse button, drag the curve.
4. Release the mouse button and your curve is finished

More Flash Tutorials: Click Here